Results 1 to 5 of 5

Thread: Post Splice

  1. #1
    Join Date
    May 2015
    Location
    oregon
    Posts
    1

    Default Post Splice

    I am renovating a deck with a a covered porch. I just removed plywood cladding over this post. The two main support posts for the porch are 4x6 with another 2x6 slapped on the side. The post is made up of two six foot 4x6's butt jointed with metal straps and carriage bolts.

    Is this code anywhere?

    Built in 1995. Lots of other substandard practices mixed in on other work.

    I plan to replace the 4x6 with a 12 foot solid post. I have seen splices in posts and beams with long half laps but never just end to end.

    I am a homeowner and this is my first post. Hopefully I get the attachment right.

    Thanks

    Similar Threads:
    ***IMPORTANT*** You Need To Register To View Images ***IMPORTANT*** You Need To Register To View Images
    Member Benefits1

  2. #2
    Join Date
    Feb 2009
    Location
    Southern Vancouver Island
    Posts
    4,607

    Default Re: Post Splice

    I see why they covered it all up with plywood. That might be a repair that was done, such as if termites attacked the original post and they replaced the bottom half, maybe?
    In any case it is good you are fixing that.

    John Kogel, RHI, BC HI Lic #47455
    www.allsafehome.ca

  3. #3
    Join Date
    Mar 2007
    Location
    Santa Rosa, CA
    Posts
    3,154

    Default Re: Post Splice

    Quote Originally Posted by Ed Reilly View Post
    I am renovating a deck with a a covered porch. I just removed plywood cladding over this post. The two main support posts for the porch are 4x6 with another 2x6 slapped on the side. The post is made up of two six foot 4x6's butt jointed with metal straps and carriage bolts.

    Is this code anywhere?

    Built in 1995. Lots of other substandard practices mixed in on other work.

    I plan to replace the 4x6 with a 12 foot solid post. I have seen splices in posts and beams with long half laps but never just end to end.

    I am a homeowner and this is my first post. Hopefully I get the attachment right.

    Thanks
    Ed,

    That splice creates a hinge, even with the straps. I cannot imagine that would be acceptable anywhere. John is correct, it is good that you are replacing it.

    Department of Redundancy Department
    Supreme Emperor of Hyperbole
    http://www.FullCircleInspect.com/

  4. #4
    Join Date
    Mar 2007
    Location
    Fletcher, NC
    Posts
    28,042

    Default Re: Post Splice

    Quote Originally Posted by Ed Reilly View Post
    Built in 1995. Lots of other substandard practices mixed in on other work.
    And likely built without a permit.

    You are right to replace it with a solid single piece post from the footing to the roof (or whatever is above).

    Jerry Peck
    Construction/Litigation/Code Consultant - Retired
    www.AskCodeMan.com

  5. #5

    Default Re: Post Splice

    If a proper connector were used while it seems strange it might have been acceptable. This is common practice with pilings (larger) to make repairs. Usually the cut is not straight access, it is a saddle cut and then bolts are added or metal re-enforcing.

    Jeff Zehnder - Home Inspector, Raleigh, NC
    http://www.jjeffzehnder.com/
    http://carolinahomeinspections.com/

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •